Virtual TapeServer 6.03.41 Installation Guide

27
Configuring Network Settings
Virtual TapeServer (VTS) ships with the following default network configuration:
IP address: 192.168.2.150
Netmask: 255.255.255.0
Gateway: 192.168.2.1
Hostname: tapeserver.tapelabs.com
Before making any changes, obtain a new IP address, netmask, gateway, and hostname that
are appropriate for your site from the network administrator.
To change the network configuration, you must connect a monitor, keyboard, and mouse to
VTS before powering it on. To change the default settings, use a console window and complete
the following steps:
1. Log in as root. See Credentials on page 127 for a list of the default user accounts provided
on the server.
2. Enter startx. The user interface is displayed.
3. From the OS menu, select System Tools→Network Device Control. This displays the
Network Configuration window: