Virtual TapeServer 6.03.41 Installation Guide

28 | Configuring Network Settings
4. Select the network device to modify (default is eth0) by double-clicking eth0 or eth1. Eth0
corresponds to port 1 on the back of the VTS server, and Eth1 corresponds to port 2.
The Ethernet Device window is displayed:
5. Change the static IP settings, or select DHCP to apply the IP address. Then click OK to
return to the Network Configuration window.
6. Click the DNS tab and enter the host name you want to assign to VTS, the IP address of
your DNS server(s), and the domain.
7. Select FileSave to save the settings.
8. Click on the Devices tab, select eth0 (or eth1), and click Activate. When prompted, click
Yes to save the changes. Then, click OK on the next popup dialog.
9. To exit the interface, select Logout root from the Linux icon. Click Logout on the popup
dialog that is displayed.