Virtual TapeServer 6.03.41 Installation Guide

34 | Reconfiguring and Validating Virtual Tape Connections
Requires the View/Manage Configuration access right
To modify the properties of a virtual tape connection
1. Separate the virtual tape drive from its logical and physical counterparts. You cannot
reconfigure a virtual tape drive while it is connected to logical and physical drives.
On the System Overview page, the relationship between each virtual tape drive and the
logical and physical drives it emulates is shown:
For example, the $VTAPE01 virtual tape drive is associated with the LTAPE01 logical
drive and the PTAPE01 physical hard drive: