Virtual TapeServer 6.03.41 Installation Guide

56 | Configuring Access Control
User Access Controls Enables the user to change his or her password
only within Access Control
Block and Unblock TapeServer Displays the Block & Unblock TapeServer link
on Supervisory Functions page, which enables
the user to block and unblock VTS functions
Database Download Enables the user to download the database from
the Supervisory Functions page
Database Upload Enables the user to upload a database from the
Supervisory Functions page
Edit VTS Configuration File Enables the user to edit the VTS configuration
file from the Supervisory Functions page
Halt and Reboot TapeServer Enables the user to halt and reboot VTS from
the Supervisory Functions page
System Maintenance Functions Enables the user to apply revision updates,
apply customized code changes, stop and start
the EMS Service, and stop and start the Inter-
Systems Communication (ISC) service from the
Supervisory Functions page
Turn Compression On or Off Enables the user to enable or disable
compression from the Supervisory Functions
page
VTS/Linux Configuration Backup Enables the user to back up the configuration
file from the Administrator Utilities page,
which is displayed by clicking Administrator
Utilities on the Factory Setup page
VTS/Linux Configuration
Restore
Enables the user to restore the configuration
file from the Administrator Utilities page,
which is displayed by clicking Administrator
Utilities on the Factory Setup page
View log files Enables the user to view log files from the
Supervisory Functions page
View/Manage Configuration Grants access to the View Configurations and
Manage Connections menus
Virtual Tape Operations Grants access to the Virtual Media - Operation
page
Scan and Cleanup Control Panel Grants access to the Virtual Media - Scan/
Cleanup page
Virtual Tape Cartridge
Maintenance
Grants access to the Virtual Media - Cartridge
Maintenance page
Right Description