Virtual TapeServer 6.03.41 Installation Guide

Configuring EMS Communication | 71
Error: LEG/BEX/NBP/TSM
command failure for $cart_request
Critical The EMS Policy for HSM failed.
Check the command syntax and
context. Repair and resubmit.
Error: LEG/BEX/NBP/TSM
command failure for $cart_request
Critical
Error: Non-zero return-code ($rc)
from dsmc (try this url … for
$cart_request.
Critical A TSM failure occurred. Examine
the return (error) code and correct
the problem.
Error: Non-zero return-code ($rc)
from NetBackup for $cart_request.
Warning
Error: Processing failed, no files
processed for $cart_request
Critical No files were successfully processed.
See the HSM get or HSM put log
files on the Supervisory Functions
page for details about the HSM
request.
Error: Success message not found in
NetBackup job output for
$cart_request.
Critical An HSM request failed to find or
process the virtual tapes for the
request.
Error: there is no pool in the file
path for $cart_request.
Critical The virtual tape path is not valid.
Repair and resubmit the request.
Error: TSM command failure for
$cart_request.
Warning The tsm_version parameter is not
configured properly in the VTS
configuration file, which is available
on the Supervisory Functions page.
Error: Unrecognized product
specification; $hsm for
$cart_request.
Critical The hsm_product parameter is
incorrect. Repair and resubmit the
request.
Error: Unrecognized product
specification; $hsm for
$cart_request.
Critical The hsm_product parameter is
incorrect. Repair and resubmit the
request.
Error: Volser and/or partition
information not found in job output
for $cart_request
Critical An HSM request failed to find or
process the virtual tapes for the
request.
HSM not enabled Critical HSM must be enabled in the VTS
configuration file before it can be
used.
HSM not enabled Critical The hsm_enable parameter is
incorrect. Repair and resubmit the
request.
Message Text Severity Recommended Action