Virtual TapeServer 6.03.41 Installation Guide

Enabling Enterprise Integration and Migration | 89
hsm_optfile_pool For Tivoli Storage Manager only:
Specifies the path to the optfile file
for a specific pool. This parameter
overrides the hsm_optfile
parameter for the pool.
Path No
hsm_policy For NetBackup only:
Specifies the backup policy.
Policy Yes
hsm_schedule For NetBackup only:
Specifies the backup schedule.
Schedule Yes
hsm_erase_after_
backup
Enables VTS to automatically erase
a virtual tape after it is successfully
migrated. Only the tape data is
erased; the metadata remains.
YES or NO No
hsm_joblog_
maxnum
Specifies the maximum number of
job log files to be retained. These
files contain the output from each
job. This value applies separately to
backup and restore jobs. If set to
zero, no logs are retained.
Integer, from
0-999
No
hsm_summary_limit Specifies the number of lines
retained in the log file, which
records the command used to invoke
each backup or restore job. This is a
joint log that contains only the
commands used, not the job output.
Integer No
hsm_restore_period For Backup Express only:
Specifies how far back in time the
BMA should search its catalog for
the file to be restored. Specify the
restore period in the nnU format
where:
• nn is a number between 1 and 99
• U is the unit; specify “d” for days,
“w” for weeks, or “y” for years
Value No
ems_hsm_backup_
notification
Sends notifications to the NonStop
kernel (NSK) from the EMS Telnet
policy process. For example, after a
virtual tape is migrated, a
successful or failed message is
generated so that the NSK can
determine if the operation was
successful.
YES or NO No
Parameter Description Values Req’d?