Virtual TapeServer 6.03.41 Operations and Administration Guide

50 | Configuring User Interface Preferences
opwin_ImportExport Displays the Import/Export button on the
Virtual Media - Operation page.
YES or NO
opwin_Migrate Displays the Migrate button on the
Virtual Media - Operation page.
YES or NO
opwin_AllowAutoRefresh Whether to allow auto-refresh on the
Virtual Media - Operation page.
YES or NO
opwin_ShowLimits Displays pool size limits on the Virtual
Media - Operation page.
YES or NO
opwin_ShowReadOnly Displays the read-only flag column, which
indicates whether the virtual tape is set to
read-only or read/write, on the Virtual
Media - Operation page.
YES or NO
opwin_ShowCompression Displays the compression ratio (c/ratio)
column on the Virtual Media - Operation
page.
YES or NO
opwin_ShowLastWritten Displays the last written column on the
Virtual Media - Operation page.
YES or NO
opwin_filesystem_alert Sets the percentage for the /VAULTxx file
system usage alert on the Virtual Media -
Operation page. Set this parameter to a
value greater than 0, or set it to 0 to
disable the feature.
Integer
notifications Displays operation status in the upper
right-hand corner of the page.
YES or NO
notifications_interval Specifies how often to check for
notifications, in seconds.
Integer
lowspace_notify_
percentage
Specifies the percentage of free space that
must be available; if the amount of free
space falls below this percentage, the low
vault space notification is posted on the
System Status page.
Integer
free_space_status Specifies whether to display the Free
Space information (for each vault) on the
System Status page.
YES or NO
status_ChangeRate Specifies whether to display the CHANGE
RATE button on the System Status page.
YES or NO
status_StopStart Specifies whether to display the Stop/Start
Refreshing button on the System Status
page.
YES or NO
Parameter Description Values