Virtual TapeServer 6.03.41 Operations and Administration Guide

62 | Managing Pools and Virtual Tapes
Requires the Erase Cartridges access right to erase a virtual tape; requires the Delete
Cartridges access right to delete a virtual tape
To erase or delete a virtual tape from the Operation page
1. Click Virtual Media on the navigation pane. The Virtual Media - Operation page is
displayed.
2. Select a virtual tape in the cartridge column. You may need to expand a pool to see the
list of virtual tapes.
3. Click Erase to erase the contents or click Delete to delete the entire tape.
Note If the Erase or Delete button is not displayed, see Enabling features on the user
interface on page 49 for information about displaying these buttons.
4. When prompted, click OK to confirm the operation.