Virtual TapeServer 6.03.41 Operations and Administration Guide

Using Scan/Cleanup | 77
cleanup_show_erase_column='YES'
cleanup_minimum_size_GB='8'
cleanup_minimum_size_MB='0'
cleanup_show_size_column='NO'
meta_control_panel='NO'
4. Click SAVE to save all changes.
Overview of the Scan/Cleanup page
After you enable Scan/Cleanup, you can display the user interface for this feature by clicking
Virtual Media on the navigation pane. Then, select scan/cleanup from the window drop-
down list. The Scan/Cleanup page is displayed.
Here is a description of the status tables, fields, and buttons on this page:
Status table
This table lists all virtual tapes on the system and their Scan/Cleanup status. The following is
a description of each column:
Pool :: Cartridge
Displays the name of the pool and virtual tape.
Erased
Displays the timestamp when the virtual tape was erased.
Written
Displays the timestamp when data was last written to the virtual tape.