Virtual TapeServer 6.03.42 Installation Guide

96 | Enabling Enterprise Integration and Migration
Here are sample configurations for each BMA:
• Backup Express:
hsm_enable="YES"
hsm_product="BEX"
hsm_server="lab-bex"
hsm_username="sysadmin"
hsm_password="tapelabs"
hsm_backup_pools="MEDIAPOOL DLT DEVICEPOOL"
hsm_backup_options="CHECKSUM Y; EOJ_ACTION U; RETENTION 999;"
hsm_backup_options_LABELED="CHECKSUM Y; EOJ_ACTION U; RETENTION
999;"
hsm_backup_options_CADE="CHECKSUM Y; EOJ_ACTION U; RETENTION 999;"
ems_hsm_backup_notification="YES"
hsm_restore_period="90d"
hsm_summary_limit Specifies the number of lines
retained in the log file, which
records the command used to invoke
each backup or restore job. This is a
joint log that contains only the
commands used, not the job output.
Default value: 1000
Integer No
hsm_restore_period For Backup Express only:
Specifies how far back in time the
BMA should search its catalog for
the file to be restored. Specify the
restore period in the nnU format
where:
• nn is a number between 1 and 99
• U is the unit; specify “d” for days,
“w” for weeks, or “y” for years
Default value: 90d
Value No
ems_hsm_backup_
notification
Sends notifications to the NonStop
kernel (NSK) from the EMS Telnet
policy process. For example, after a
virtual tape is migrated, a
successful or failed message is
generated so that the NSK can
determine if the operation was
successful.
Default value: YES
YES or NO No
Parameter Description Values Req’d?