Virtual TapeServer 6.03.42 Installation Guide

SCSI-to-Fibre Channel Adapter Upgrade | 127
As a reminder, here are the slot-to-bus relationships on the VT5900-E (HP ProLiant
DL385 G2):
f. Click Set Limits.
8. Reboot VTS.
9. Use the VTS web interface to reconfigure a virtual tape connection.
After the Fibre Channel ports are configured as virtual devices, the final step in this
process is to reconfigure the virtual tape connections. Virtual tape connections originally
set up as SCSI need to be edited for use on a Fibre Channel bus.
4 B 9 SCSI $VTAPE09
5 A 14 2G Fibre Fibre
5 B 15 2G Fibre Fibre
6 A 12 2G Fibre Fibre
6 B 13 2G Fibre Fibre
7 A 2 SCSI $VTAPE02
7 B 3 SCSI $VTAPE03
8 A 0 SCSI $VTAPE00
8 B 1 SCSI $VTAPE01
PCI Slot Bus Number Card Type Virtual Tape Name
1 A N/A (P400 controller card)
1 B N/A (P400 controller card)
2 A 4 4G Fibre Fibre
2 B 5 4G Fibre Fibre
3 A N/A (left open for P800
controller card)
3 B N/A (left open for P800
controller card)
4 A 0 2G Fibre $VTAPE00
4 B 1 2G Fibre $VTAPE01
5 A 2 2G Fibre $VTAPE02
5 B 3 2G Fibre $VTAPE03
PCI Slot Bus Number Card Type Virtual Tape Name