Virtual TapeServer 6.03.42 Installation Guide

128 | SCSI-to-Fibre Channel Adapter Upgrade
Refer to the steps documented in Modifying virtual tape connections on page 35. When
changing the properties, change the TARGET from 5 to 0 from the drop-down box. Repeat
the steps for each virtual tape connection that needs to be updated.
10. When the startup process is complete, open a terminal window on VTS and log in as root.
Using a text editor, remove the lines that were commented out in step
2d on page 122
(remove the # sign in front of each vault, such as #LABEL=/VAULT01 becomes LABEL=/
VAULT01). Do this for all vaults.
11. Save all changes and exit the editor.
12. Reboot VTS.