Virtual TapeServer 6.03.42 Installation Guide

Hardware Information for Legacy Installations | 149
7. Place the top cover back in place and secure it. Slide the HP ML530 ProLiant server back
into the rack and secure the two quick-disconnect screws on the front panel.
8. From the rear of the HP ProLiant ML530 server, reconnect any remaining SCSI cables to
the same ports where they were originally connected, if necessary. Because you removed
one or more SCSI cards, you will have extra, unused SCSI cables. Reconnect the power
cords.
Now, continue with step 5 on page 125 and step 6 on page page 125.
For step 7e on page 126, consider the following slot-to-bus relationships on the HP ProLiant
ML530 G2 (VT5902):
PCI-X Slot Bus Number Virtual Tape Name
2 A 2 $VTAPE00
2 B 3 $VTAPE01
3 A 4 $VTAPE02
3 B 5 $VTAPE03
4 A 6 $VTAPE04
4 B 7 $VTAPE05
5 A 8 $VTAPE06
5 B 9 $VTAPE07
6 A 10 Fibre
6 B 11 Fibre
7 Gb network interface card