Virtual TapeServer 6.03.42 Installation Guide

70 | Configuring EMS Communication
d. Click SAVE to save all changes.
3. Click RESTART on the Virtual Media - Mounts and Locks page to restart the EMS
service. Or, click Start EMS Service on the Supervisory Functions page. You must start
or restart the service to enable VTS to reread the configuration file.
The following table lists the messages that are generated by VTS. Here is an explanation of
the information for each EMS message:
• The message text.
Some of the text in the messages and errors is parameterized, as indicated by the dollar
sign ($). In a real message, the parameterized text is replaced by a real value. For
example, the host system that initiated the request is represented in the message text as
$host, but an actual message displays the real hostname, such as DEV2.
• The severity of the message. The levels of severity include the following:
• Informational (Inform) — A normal operation has occurred.
• Warning — A suspicious operation, configuration, or user error has occurred. The
system or application can handle the error with no interruption and limited
degradation of service.
• Critical — A system or service error has occurred. The system can recover but a
momentary loss or permanent degradation of service may occur.
• The recommended action to take.
Message Text Severity Recommended Action
(Error:) Non-zero return-code ($rc)
from dsmc (try this url … for
$cart_request.
Critical An IBM Tivoli Storage Manager
(TSM) failure occurred. Examine
the return error code and correct the
problem.
AUTOCOPY FAILED: Request by:
$requestor ($retry_number) cannot
create directory $target (rc=$rc)
Critical No action is required. The task will
be retried.
AUTOCOPY FAILED: Request by:
$requestor ($retry_number) cannot
reach $target/$filename (rc=$rc)
Critical No action is required. The task will
be retried.
AUTOCOPY FAILED: Requested
by: $requestor ($retry_number)
from $target/$filename(rc=$rc)
Critical The autocopy task failed. Correct
the problem and resubmit the job.
AUTOCOPY STARTING: Request
by: $requestor ($retry_number) scp
from $sourcedir/$filename to
$target/$filename
Inform
AUTOCOPY SUCCESSFUL:
Requested by: $requestor
($retry_number) from $sourcedir/
$filename to $target/$filename
Inform
BEX – No files found to restore Inform