Virtual TapeServer 6.03.42 Installation Guide

Enabling Instant DR and AutoCopy | 83
c. Provide the IP address, hostname, and alias for the local VTS server. In this example,
the following values are entered:
• IP Address: 10.10.2.145
• Hostname: newyork.tapelabs.com
• Aliases: newyork
d. Click OK.
e. Repeat these steps for each VTS site.
In this example, after completing these steps for all VTS servers, the Hosts tab looks
like this:
f. Select File→Save.
g. Click OK.
h. Close the Network Configuration window.
i. From the operating system GUI, select the Screen icon located at the bottom left-hand
side of the window. A command prompt window is displayed.