Virtual TapeServer 6.03.42 Operations and Administration Guide

94 | Using Scan/Cleanup
Overview of the Scan/Cleanup page
After you enable Scan/Cleanup, you can display the user interface for this feature by clicking
Virtual Media on the navigation pane. Then, select scan/cleanup from the window drop-
down list. The Scan/Cleanup page is displayed.
Here is a description of the status tables, fields, and buttons on this page:
Status table
This table lists all virtual tapes on the system and their Scan/Cleanup status. The following is
a description of each column:
Pool :: Cartridge
Displays the name of the pool and virtual tape.
Erased
Displays the timestamp when the virtual tape was erased.
Written
Displays the timestamp when data was last written to the virtual tape.
Retention
Specifies how long the virtual tape will be retained. A retention period specifies an
expiration date and time, which governs when vault space can be reclaimed.
Migrated
Displays the timestamp when the virtual tape was backed up (typically to physical
tape) by a Backup Management Application (BMA). If the virtual tape was migrated
by another application, n/a or not by VTS is displayed.