Virtual TapeServer 6.03.42 Operations and Administration Guide

4 | Introduction
System Status page
The System Status page provides a view of VTS services that are currently running, virtual
tape connections, and vault and pool free space. Only users that are assigned the View System
Status access right can view this page.
Click System Status on the navigation pane to view this page:
The following sections are provided on this page:
SERVER_NAME
Provides the VTS system name, the current software version and date created, and
the current date and time.
Services
Displays the current services that are enabled on the system and whether they are
running. The following services may be listed:
ISC — Interserver Communication Service, which enables communication between
VTS servers that have equal access to some or all virtual tapes. Servers in the ISC
ring notify the others whenever they satisfy a mount request.
EMS — Event Management Service, which starts the EMS distributor on the
NonStop server by issuing a Tandem Advanced Command Language (TACL)
command. The distributor notifies the VTS EMS service when an EMS message is
posted on the NonStop server.
VTS — Virtual TapeServer, which refers to the Virtual TapeServer engine and
provides the core of VTS functionality.
XML — Extensible Markup Language, which is the communication interface that can
be used instead of EMS.
SecureVTS
If SecureVTS is enabled, this section displays its status.