Virtual TapeServer 6.03.42 Operations and Administration Guide

Configuring EMS Communication | 45

ems_hostaddr_DEV2='192.168.50.66'

ems_hostdevs_DEV2='$TAPE25'

ems_virtdevs_DEV2='VTAPE25'

ems_username_DEV2='super.user'

ems_password_DEV2='p@ssword'

ems_service_select_DEV2='TACL'

ems_login_command_DEV2='#SET #INFORMAT TACL |EMSDIST /CPU 0, PRI

100, NAME $VTMS1/ TYPE P, COLLECTOR $0, TEXTOUT [#MYTERM]'

Here is an example of the parameters set in the default VTS configuration file:

ems_enable="NO"

ems_mount_delay="0"

ems_notify_enable="NO"

ems_notification_enable="NO"

ems_notification_level="ERROR CRITICAL"

ems_keep_alive="YES"

ems_notify_hostnames=""

ems_notify_wait_timeout="20"

ems_notify_logout_timeout="3"

ems_InterSystemCommunication_hosts=""

ems_hostport_ANYSYS="23"

ems_response_timeout='5'

ems_service_prompt_ANYSYS='/^Enter Choice>\s*$/i'

ems_service_select_ANYSYS='TACL'

ems_login_userprompt_TYPE:TACL='/TACL 1>\s*$/'

ems_login_useranswer_TYPE:TACL='logon %username%'

ems_login_passprompt_TYPE:TACL='/Password:\s*$/i'

ems_login_passanswer_TYPE:TACL='%password%'

ems_login_successful_TYPE:TACL='/Last Logon:/'

ems_login_userprompt_TYPE:TACLS='/login:\s*$/i'

ems_login_useranswer_TYPE:TACLS='%username%'

ems_login_passprompt_TYPE:TACLS='/Password:\s*$/i'

ems_login_passanswer_TYPE:TACLS='%password%'

ems_login_successful_TYPE:TACLS='/Last Logon:/'

ems_login_userprompt_TYPE:XYGATE='/TACL 1>\s*$/'

ems_login_useranswer_TYPE:XYGATE='logon %username%'

ems_login_passprompt_TYPE:XYGATE='/Password:\s*$/i'

ems_login_passanswer_TYPE:XYGATE='%password%'

ems_login_successful_TYPE:XYGATE='/Last Logon:/'

ems_service_answer_TYPE:SAFEGUARD='logon'

ems_login_userprompt_TYPE:SAFEGUARD='/TACL 1>\s*$/'

ems_login_useranswer_TYPE:SAFEGUARD='logon %username%'

ems_login_passprompt_TYPE:SAFEGUARD='/Password:\s*$/i'

ems_login_passanswer_TYPE:SAFEGUARD='%password%'

ems_login_successful_TYPE:SAFEGUARD='/Last Logon:/'

ems_login_command_ANYSYS=''