Virtual TapeServer 6.03.42 Operations and Administration Guide

Configuring User Interface Preferences | 53
Here is an example of these parameters:
opwin_Mount="YES"
opwin_Unmount="YES"
opwin_Erase="YES"
opwin_Delete="YES"
opwin_ImportExport="YES"
opwin_Migrate="YES"
opwin_AllowAutoRefresh="NO"
opwin_ShowLimits="YES"
opwin_ShowReadOnly="NO"
opwin_ShowCompression="YES"
opwin_ShowLastWritten="NO"
opwin_filesystem_alert="90"
notifications="NO"
notifications_interval="60"
lowspace_notify_percentage="5"
notifications_interval Specifies how often to check for
notifications, in seconds.
Default value: 60
Integer
lowspace_notify Enables notification on low vault space.
Default value: YES
YES or NO
lowspace_notify_keep Specifies whether to continue to display
the low vault space notification until it is
no longer valid.
Default value: NO
YES or NO
lowspace_notify_
percentage
Specifies the percentage of free space that
must be available; if the amount of free
space falls below this percentage, the low
vault space notification is posted on the
System Status page.
Default value: 5
Integer
free_space_status Specifies whether to display the Free
Space information (for each vault) on the
System Status page.
Default value: YES
YES or NO
status_ChangeRate Specifies whether to display the CHANGE
RATE button on the System Status page.
Default value: YES
YES or NO
status_StopStart Specifies whether to display the Stop/Start
Refreshing button on the System Status
page.
Default value: YES
YES or NO
Parameter Description Values