Virtual TapeServer 6.03.42 Operations and Administration Guide

Managing Pools and Virtual Tapes | 65
To erase or delete a virtual tape from the Operation page
1. Click Virtual Media on the navigation pane. The Virtual Media - Operation page is
displayed.
2. Select a virtual tape in the cartridge column. You may need to expand a pool to see the
list of virtual tapes.
3. Click Erase to erase the contents or click Delete to delete the entire tape.
Note If the Erase or Delete button is not displayed, see Enabling features on the user
interface on page 51 for information about displaying these buttons.
4. When prompted, click OK to confirm the operation.