Virtual TapeServer 6.04.01 Installation Guide

Enabling Enterprise Integration and Migration | 111
hsm_optfile For Tivoli Storage Manager only:
Specifies the path to the optfile file.
Default value: dsm.opt
Path Yes
hsm_optfile_pool For Tivoli Storage Manager only:
Specifies the path to the optfile file
for a specific pool. This parameter
overrides the hsm_optfile
parameter for the pool.
Path No
hsm_put_batch_size For Tivoli Storage Manager only:
Specifies the maximum number of
virtual tapes to lock and migrate at
a time, thereby creating batches of
tapes to migrate. This parameter is
optional and set to 0 by default,
which causes VTS to lock all target
virtual tapes until the migration is
complete.
Note: Using this parameter may
impact performance, slowing the
migration.
Integer, from
1-30
No
hsm_policy For NetBackup only:
Specifies the backup policy.
Policy Yes
hsm_schedule For NetBackup only:
Specifies the backup schedule.
Schedule Yes
hsm_erase_after_
backup
Enables VTS to automatically erase
a virtual tape after it is successfully
migrated. Only the tape data is
erased; the metadata remains.
Default value: NO
YES or NO No
hsm_joblog_
maxnum
Specifies the maximum number of
job log files to be retained. These
files contain the output from each
job. This value applies separately to
backup and restore jobs. If set to
zero, no logs are retained.
Default value: 20
Integer, from
0-999
No
Parameter Description Values Req’d?