Virtual TapeServer 6.04.01 Installation Guide

112 | Enabling Enterprise Integration and Migration
Here are sample configurations for each backup management application:
• Backup Express:
hsm_enable='YES'
hsm_product='BEX'
hsm_server='lab-bex'
hsm_backup_pools='MEDIAPOOL DLT DEVICEPOOL'
hsm_backup_options='CHECKSUM Y; EOJ_ACTION U; RETENTION 999;'
hsm_backup_options_LABELED='CHECKSUM Y; EOJ_ACTION U; RETENTION
999;'
hsm_backup_options_CADE='CHECKSUM Y; EOJ_ACTION U; RETENTION 999;'
ems_hsm_backup_notification='YES'
hsm_restore_period='90d'
• Tivoli Storage Manager:
hsm_enable='YES'
hsm_product='TSM'
hsm_optfile='dsm.opt'
hsm_optfile_E1_HAL_10YEARS='/usr/opt/dsm.vts10.opt'
ems_hsm_backup_notification='YES'
hsm_summary_limit Specifies the number of lines
retained in the log file, which
records the command used to invoke
each backup or restore job. This is a
joint log that contains only the
commands used, not the job output.
Default value: 1000
Integer No
hsm_restore_period For Backup Express only:
Specifies how far back in time the
backup management application
should search its catalog for the file
to be restored. Specify the restore
period in the nnU format where:
• nn is a number between 1 and 99
• U is the unit; specify “d” for days,
“w” for weeks, or “y” for years
Default value: 90d
Value No
ems_hsm_backup_
notification
Sends notifications to the NonStop
kernel (NSK) from the EMS Telnet
policy process. For example, after a
virtual tape is migrated, a
successful or failed message is
generated so that the NSK can
determine if the operation was
successful.
Default value: YES
YES or NO No
Parameter Description Values Req’d?