Virtual TapeServer 6.04.01 Installation Guide

147
Hardware Information for Legacy Installations
This chapter describes the hardware that was shipped for the Virtual TapeServer (VTS)
6.03.39, 6.03.41, and 6.03.42 installations and that is supported in an upgraded environment.
It also provides cabling and Fibre Channel upgrade procedures for the old hardware.
Hardware overview
For VTS installations that are upgrading to 6.04, the following hardware may be installed.
Note Models shipped with 6.03.42 are still shipped with 6.04. Refer to the “Installation
Summary and Checklist” and “Cabling and Connecting VTS” chapters for an overview
of those models and their cabling instructions.
Servers
One of the following VTS server modules was installed:
• VTS model VT5900-A was built on the HP ProLiant DL585 G1 server:
• Models VT5900-B and VT5900-C were built on the HP ProLiant DL380 G4 server: