Virtual TapeServer 6.04.01 Installation Guide

60 | Configuring Access Control
Enabling a closed system
You can enable a closed system to require authentication. The user can access only the
resources assigned to a particular group. You can enable or disable individual rights to
resources.
Requires the System Access Controls access right
To enable a closed system
1. Click Access Control on the navigation pane.
2. When prompted, log in. After logging in, the Access Control page is displayed.
3. Under Defaults and Undo, click the Restore CLOSED Defaults button, which restores
all default users, groups, and rights.
4. Click OK on the pop-up dialog box to confirm that you want to restore closed defaults.
Below are closed system defaults:
• Users — The following users are defined.
• Groups — The following rights are assigned to the groups:
Note You cannot create new groups but you can modify permissions on the existing
groups, and users can be added and removed from the groups. Also, the rights are
organized in categories. If you grant access to a category, all rights in the
Username Group
admin Administration
operator Operations
tapelabs Supervisor