Virtual TapeServer 6.04.01 Installation Guide

Configuring EMS Communication | 87
e. Click SAVE to save all changes.
Here is an example of the required parameters:
ems_enable='YES'
ems_hostnames='DEV2'
ems_hostaddr_DEV2='192.168.50.66'
ems_login_
command_NSserver
Initiates the EMS Distributor
on the NonStop server. The
name variable in the command
($VTMS1 in the following
example) should be unique for
every VTS server.
Example:
ems_login_command_DEV2='
#SET #INFORMAT TACL
|EMSDIST /CPU 0, PRI 100,
NAME $VTMS1, TERM
$ZHOME/ BACKUP 1, TYPE P,
COLLECTOR $0, TEXTOUT
[#MYTERM]'
Note: When configuring this,
include everything on a single
line.
An empty
string or CR
to send a
carriage
return
or
Multiple
commands
separated by
|
Yes
ems_vaults_
NSserver
Restricts access to vaults from
any hosts.
_ANYSYS is not valid here.
This list of permitted vaults
should be specified as a space-
delimited list. For any host, if
there are no vaults specified
here then all vaults are
accessible. Leading slashes in
the vault list are optional.
List of
vaults
separated by
spaces
No
ems_resetdevs_
NSserver
Specifies the list of tape names
as known to the host system for
which we will issue a reset
before each mount. The
ems_mount_reset parameter
is a global override for this and
must be enabled for the
ems_resetdevs parameter to
take effect. You can also specify
ALL instead of a list of tapes. If
_ANYSYS is specified for
NSserver, only ALL is
recognized.
List of tape
names
separated by
spaces
No
Parameter Description Values Required