Virtual TapeServer 6.04.01 Installation Guide

88 | Configuring EMS Communication

ems_hostdevs_DEV2='$TAPE25'

ems_virtdevs_DEV2='VTAPE25'

ems_service_select_DEV2='TACL'

ems_login_command_DEV2='#SET #INFORMAT TACL |EMSDIST /CPU 0, PRI

100, NAME $VTMS1, TERM $ZHOME/ BACKUP 1, TYPE P, COLLECTOR $0,

TEXTOUT [#MYTERM]'

Here is an example of the parameters set in the default VTS configuration file:

ems_enable='NO'

ems_mount_delay='0'

ems_notify_enable='NO'

ems_notification_enable='NO'

ems_notification_level='ERROR CRITICAL'

ems_keep_alive='YES'

ems_notify_hostnames=''

ems_notify_wait_timeout='20'

ems_notify_logout_timeout='3'

ems_InterSystemCommunication_hosts=''

ems_hostport_ANYSYS='23'

ems_response_timeout='5'

ems_service_prompt_ANYSYS='/^Enter Choice>\s*$/i'

ems_service_select_ANYSYS='TACL'

ems_login_userprompt_TYPE:TACL='/TACL 1>\s*$/'

ems_login_useranswer_TYPE:TACL='logon %username%'

ems_login_passprompt_TYPE:TACL='/Password:\s*$/i'

ems_login_passanswer_TYPE:TACL='%password%'

ems_login_successful_TYPE:TACL='/Last Logon:/'

ems_login_userprompt_TYPE:TACLS='/login:\s*$/i'

ems_login_useranswer_TYPE:TACLS='%username%'

ems_login_passprompt_TYPE:TACLS='/Password:\s*$/i'

ems_login_passanswer_TYPE:TACLS='%password%'

ems_login_successful_TYPE:TACLS='/Last Logon:/'

ems_login_userprompt_TYPE:XYGATE='/TACL 1>\s*$/'

ems_login_useranswer_TYPE:XYGATE='logon %username%'

ems_login_passprompt_TYPE:XYGATE='/Password:\s*$/i'

ems_login_passanswer_TYPE:XYGATE='%password%'

ems_login_successful_TYPE:XYGATE='/Last Logon:/'

ems_service_answer_TYPE:SAFEGUARD='logon'

ems_login_userprompt_TYPE:SAFEGUARD='/TACL 1>\s*$/'

ems_login_useranswer_TYPE:SAFEGUARD='logon %username%'

ems_login_passprompt_TYPE:SAFEGUARD='/Password:\s*$/i'

ems_login_passanswer_TYPE:SAFEGUARD='%password%'

ems_login_successful_TYPE:SAFEGUARD='/Last Logon:/'

ems_login_command_ANYSYS=''