Virtual TapeServer 6.04.01 Operations and Administration Guide

ManualsBrandsHP ManualsServerHP NonStop G-Series

Configuring EMS Communication | 49

e. Click SAVE to save all changes.

Here is an example of the required parameters:

ems_enable='YES'

ems_hostnames='DEV2'

ems_hostaddr_DEV2='192.168.50.66'

ems_login_

command_NSserver

Initiates the EMS Distributor

on the NonStop server. The

name variable in the command

($VTMS1 in the following

example) should be unique for

every VTS server.

Example:

ems_login_command_DEV2='

#SET #INFORMAT TACL

|EMSDIST /CPU 0, PRI 100,

NAME $VTMS1, TERM

$ZHOME/ BACKUP 1, TYPE P,

COLLECTOR $0, TEXTOUT

[#MYTERM]'

Note: When configuring this,

include everything on a single

line.

An empty

string or CR

to send a

carriage

return

or

Multiple

commands

separated by

|

Yes

ems_vaults_

NSserver

Restricts access to vaults from

any hosts.

_ANYSYS is not valid here.

This list of permitted vaults

should be specified as a space-

delimited list. For any host, if

there are no vaults specified

here then all vaults are

accessible. Leading slashes in

the vault list are optional.

List of

vaults

separated by

spaces

No

ems_resetdevs_

NSserver

Specifies the list of tape names

as known to the host system for

which we will issue a reset

before each mount. The

ems_mount_reset parameter

is a global override for this and

must be enabled for the

ems_resetdevs parameter to

take effect. You can also specify

ALL instead of a list of tapes. If

_ANYSYS is specified for

NSserver, only ALL is

recognized.

List of tape

names

separated by

spaces

No

Parameter Description Values Required