Virtual TapeServer 6.04.02 for NonStop Servers Quick Setup Guide

20 | Virtual TapeServer Quick Setup Guide
• EN55024 (IEC61000-4-2, 3, 4, 5, 6, 8, 11)—Electromagnetic Immunity
• EN61000-3-2 (IEC61000-3-2)—Power Line Harmonics
• EN61000-3-3 (IEC61000-3-3)—Power Line Flicker
• EN60950-1 (IEC60950-1)—Product Safety
Laser Compliance
This product may be provided with an optical storage device (that is, CD or DVD drive) and/or
fiber optic transceiver. Each of these devices contains a laser that is classified as a Class 1 Laser
80 Safety and Compliance Product in accordance with US FDA regulations and the IEC 60825-1.
The product does not emit hazardous laser radiation.
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration implemented regulations for laser products on August 2, 1976. These regulations
apply to laser products manufactured from August 1, 1976. Compliance is mandatory for
products marketed in the United States.
SAFETY CAUTION
The following icon or caution statements may be placed on equipment to indicate the presence of
potentially hazardous conditions:
NOT FOR EXTERNAL USE
CAUTION: NOT FOR EXTERNAL USE. ALL RECEPTACLES ARE FOR INTERNAL USE
ONLY.
ATTENTION: NE PAS UTILISER A L’EXTERIEUR DE L’EQUIPEMENT
IMPORTANT: TOUS LES RECIPIENTS SONT DESTINES UNIQUEMENT A UN USAGE
INTERNE.
VORSICHT: ALLE STECKDOSEN DIENEN NUR DEM INTERNEN GEBRAUCH.
WARNING: Use the controls or adjustments or performance of procedures other than
those specified herein or in the laser product’s installation guide may result in hazardous
radiation exposure. To reduce the risk of exposure to hazardous radiation:
• Do not try to open the module enclosure. There are no user-serviceable components
inside.
• Do not operate controls, make adjustments, or perform procedures to the laser device
other than those specified herein.
• Allow only HP Authorized Service technicians to repair the module.
DUAL POWER CORDS CAUTION: “THIS UNIT HAS MORE THAN ONE POWER
SUPPLY CORD. DISCONNECT ALL POWER SUPPLY CORDS TO COMPLETELY
REMOVE POWER FROM THIS UNIT.” “ATTENTION: CET APPAREIL COMPORTE
PLUS D'UN CORDON D'ALIMENTATION. DÉBRANCHER TOUS LES CORDONS
D'ALIMENTATION AFIN DE COUPER COMPLÈTEMENT L'ALIMENTATION DE
CET ÉQUIPEMENT”. DIESES GERÄT HAT MEHR ALS EIN NETZKABEL. VOR DER
WARTUNG BITTE ALLE NETZKABEL AUS DER STECKDOSE ZIEHEN.
Any surface or area of the equipment marked with these symbols indicates the presence of
electric shock hazards. The enclosed area contains no operator-serviceable parts.
WARNING: To reduce the risk of injury from electric shock hazards, do not open this
enclosure.