Virtual TapeServer 6.04.02 Operations and Administration Guide

Using Instant DR | 99
#SET emphasis -1 
Refers to the way the message is displayed in an EMS viewer, such as ViewPoint. In
this case, it is normal text.
#SET evt_text VTSPolicy IDR idrjobname 
Specifies the message to be sent to the EMS collector. Replace idrjobname with the
name of the Instant DR job in VTS.
Add these lines to the end of an existing obey script or schedule it from Batchcom.
When the script runs, the following is sent in the EMS message:
#PUSH evt_x evt_error req_error req_read req_prompt
#PUSH action_id collector 
#LOAD /LOADED evt_x/ $system.zspidef.zemstacl
#LOAD /LOADED evt_x/ $system.zspidef.zspitacl
#LOAD /LOADED evt_x/ $system.zspidef.ztactacl
#LOAD /LOADED evt_x/ $system.zspidef.ztaptacl
#DEF evt_buf STRUCT BEGIN BYTE b(1:3000); END;
#SET collector $0
#SET action_id 0
#SET evt_error [#REQUESTER /WAIT/ READ [collector] req_error req_read 
req_prompt]
#PUSH evt_num action emphasis evt_text text_len
#SET evt_num number 
#SET action -1
#SET emphasis -1
#SET evt_text VTSPolicy IDR idrjobname 
#SET text_len 
#SET evt_error [#EMSINIT evt_buf [ZEMS^VAL^EXTERNAL^SSID] [evt_num]
ZEMS^TKN^TEXT [#charcount evt_text] [evt_text]]
#SET evt_error [#SSPUT evt_buf ZEMS^TKN^EMPHASIS [ZSPI^VAL^TRUE]]
#SET evt_error [#SSPUT evt_buf ZEMS^TKN^ACTION^NEEDED [ZSPI^VAL^TRUE]] 
#APPENDV req_prompt evt_buf
Managing licensing
After you initially enable licensing, you can update the license key or remove it. If necessary,
obtain the license key from your Sales representative.
To update the license key
1. If necessary, log in to the VTS web interface using an account that is a member of the
Administration group. Click the Log In button at the top of the page and enter a
username and password.
2. Click Supervisor Functions on the navigation pane.