Virtual TapeServer 6.04.02 Operations and Administration Guide

160 | Advanced Options for Tape Connections
The following steps describe how to disassociate the virtual tape drive ($VTAPE01 in this
example) from its logical and physical drives (LTAPE01 and PTAPE01):
a. In the navigation pane, click Manage Connections. The Manage Tape Connections
page is displayed.
b. Click Advanced at the bottom of the page. The Advanced Manage Tape Connections
page is displayed.
c. Click Delete a tape connection. The Delete A Tape Connection page is displayed:
d. Select the connection you want to delete and click Delete Tape Connection.
You can verify that the connection was deleted on the following pages:
• Virtual Media — Click Virtual Media in the navigation pane and confirm that
the virtual tape drive is no longer listed in the table on the page.
• System Overview — Click View Configurations and verify that the virtual tape
drive was moved to the Virtual Tapes section of the page and the logical and
physical drives were moved to the Logical Tapes section of the page.
2. Modify the properties of the virtual tape drive by completing the following steps:
a. Click Manage Connections in the navigation pane. The Manage Tape Connections
page is displayed.
b. Click Advanced at the bottom of the page.
c. Click Edit an existing virtual tape.