Virtual TapeServer 6.04.02 Operations and Administration Guide

48 | Configuring Web Interface Preferences
status_ChangeRate="YES"
status_StopStart="YES"
4. Click the SAVE button.
Setting the refresh rate
The System Status page is refreshed every 15 seconds by default.
Requires the Change Refresh Rate access right
To configure the refresh rate
1. Click System Status on the navigation pane.
2. Click the Change Rate button at the bottom of the page. The following page is displayed:
3. Click one of the buttons or specify a value (in seconds) in the field and click the Set
Refresh Rate button.
4. Click OK to return to the System Status page.