Virtual TapeServer 6.04.02.01 for NonStop Servers Release Notes

Known Issues | 11
missing. It is not until the user selects Add one again and then selects Cancel that the
Backup to All button is restored. (TL-3083)
WORKAROUND: Click Add One and then click Cancel and the button appears again.
 Ultrium 1 physical tape drive not displayed in web interface. When attempting to
write to an Ultrium 1 physical tape drive, the drive is not displayed in the Physical Tapes
section of the VTS web interface. The debug log shows an error executing update
inquiry_data. (TL-3136)
 PHP error messages found in Apache error_log. Error messages may be listed in /
var/log/httpd/error_log when a VTD is created or modified. The messages can be ignored.
(TL-3126)
 Web interface shows incorrect size of a cartridge that was created by the host
server and then erased by VTS. With an empty cartridge, the label and trailer size are
combined. When the cartridge is erased, the label remains, but the trailer is removed. If
there is data on the cartridge, the label size is accurate before and after the erase. (TL-
3020)
 Read-only cartridge mounted as read-write. When mounting a read-only cartridge,
the web interface displays it as read-write. This is a display issue only. (TL-2540, EAR
4726)
 Cartridges not owned by bill are not erased as indicated in the interface and log
file. However, the debug.log correctly indicates that the file failed to erase. (TL-2061)
 System ID is displayed as rc=3 on Apply VTS Software Change page. This can be
ignored. (TL-2287)
 Cartridge Status pop-up dialog is not updated while a cartridge is mounted. If
you display the Cartridge pop-up dialog by clicking a link in the size (MB) column of the
Virtual Media - Operation page and then the cartridge is mounted, the data is not
updated on the pop-up. (TL-2350)
WORKAROUND: View this information when the cartridge is not mounted.
 Scan/Cleanup page performance is slow. Loading the Scan/Cleanup page is slow if a
large number of cartridges exists. It takes about a minute for a pool containing 1,000
cartridges. (TL-2358)
 Download link for System Message Log does not work. If you click the download
link on the Examine System Logs page, the URL fails to load when you click this link.
(TL-2359)
WORKAROUND: Log in to VTS and copy the /var/log/messages file.
 Cartridge sizes are not displayed properly. Cartridges created with 1TB, 1GB, or
1MB limits will display, respectively, as 1024GB, 1024MB, and 1024K. However, 2TB
cartridges display as 2TB, 2GB carts display as 2GB, and 2MB cartridges display as 2MB.
(TL-2365)
 After logging in as admin for SecureVTS functions in an open system, changing
access controls to default closed results in excessive numbers of dialogs.
SecureVTS requires login for certain functions in the UI. If you start with an open system
and then close it by setting 'default closed' in 'Access Control', you are continually
prompted for your username and password as you navigate around. Once you enter
credentials on a password section, you are allowed to go back to that section. (TL-970)
WORKAROUND: Restore the defaults for closed access control, close the browser, and
relaunch the browser.