Virtual TapeServer 6.04.03 for NonStop Servers Quick Setup Guide

6 | Virtual TapeServer Quick Setup Guide
• SCSI converter (shipped with the VT5900-H)
• Power cord
•Rail kit
•SCSI cables
• Virtual TapeServer SCSI Interface Connection Module Sliding Rail Kit Installation guide
• VT5917 (may have been shipped with the VT5900-H and VT5900-L)
• Power cords
• Serial cable
•Rail kit
• VT5918 (may have been shipped with the VT5900-H and VT5900-L)
• HP StorageWorks Modular Smart Array 30 Installation Kit CD
• Power cords
• SAS cables
•Rail kit
Review the VTS server configuration
Here is an overview of the VTS hardware that may have been purchased:
VT5900-H VT5900-K VT5900-L
Server DL385 G5 DL185 G5 DL380 G6
Fibre
Channel
and SCSI
Cards
• Two SCSI cards
(four ports),
or one SCSI card (two
ports) and one FC
card (two 2Gb ports)
*
• One FC card
(two 4Gb ports)
One FC card
(two 4Gb ports),
or two FC cards
(four 4Gb ports)
‡
• Three FC cards
(six 4Gb ports),
or up to five FC cards
(ten 4Gb ports)
‡
Additional
Internal
Storage
Eight 146GB internal
disks (VT5904-E)
Six 1TB internal disks
(VT5900-6TB)
Not supported
External
Disk
Storage
Up to four MSA2000s
(one VT5917 and up to
three VT5918s); each
MSA2000 provides
12TB
†
Not supported Up to one MSA2000
(VT5917 or VT5918),
which provides 12TB
†