Virtual TapeServer 6.04.03 Installation Guide

9
Configuring Licensing
Before you can use Virtual TapeServer (VTS), you must enable licensing. You can enable
licensing for the following:
• Virtual tape drives (VTDs) and compression, if included
• SecureVTS
• Instant DR, which also enables AutoCopy
To request license keys, contact the HP VTS Program Manager, Glenn Garrahan, at
[e-mail]. VTS software license keys are associated with the serial number of
the VTS server, so any server hardware replacement or upgrade will requires new license
keys. Obtain a set of license keys for each VTS server in your environment.
Note If the VTS server was upgraded, you may need a Vital Product Data (VPD) file before
you can enable licensing. See the “Upgrading to 6.04” section of the Virtual
TapeServer Administration and Operations Guide for more information.
Requires Administration group membership
To enter a license key
1. Log in to the VTS web interface using an account that is a member of the Administration
group. Click the Log In button at the top of the page and enter a username and password.
2. Click Supervisor Functions on the navigation pane.