Virtual TapeServer 6.04.03 Installation Guide

42 | Configuring EMS Communication
e. In the Host Port field, specify the target Telnet or SSH port on the NonStop server.
By default, SSH runs on port 22. To identify the SSH port on the NonStop server,
refer to the PORT parameter in the SCF IN file that defines the SSH process.
f. To define the service settings, set the following:
• If you chose Telnet, specify the service selection prompt to which the EMS login
process responds and begins in the Service Prompt field. Specify any search
pattern as a Perl regular expression, and the special %username% and
%password% values may be used in responses to equate to those values (see step 7
on page 44 for values). Example: /^Enter Choice>\s*$/i
•In the Service Answer field, specify the service response. Example: TACL
g. To define the login settings, configure the following:
• If you chose Telnet, specify the user prompt that will be used during the login
process in the Login User Prompt field. Here are examples:
TACL: /TACL 1>\s*$/
TACLS: /login:\s*$/i
XYGATE: /TACL 1>\s*$/
SAFEGUARD: /TACL 1>\s*$/
• If you chose Telnet, specify the user response that will be shown during the login
process in the Login User Answer field. Here are examples:
TACL: logon %username%
TACLS: %username%
XYGATE: logon %username%
SAFEGUARD: logon %username%
•In the Login Password Prompt field, specify the password prompt that will be
returned by the host server in response to the Telnet or SSH connection. Here are
examples:
TACL: /Password:\s*$/i
TACLS: /Password:\s*$/i
XYGATE: /Password:\s*$/i
SAFEGUARD: /Password:\s*$/i
•In the Login Password Answer field, specify the password response that will be
shown during the login process. Example: %password%
•In the Login Successful field, specify a command string to send after a
successful login. Example: /Last Logon:/
•In the Login Command text box, specify the command that will initiate the EMS
Distributor on the NonStop server. Each line entered in the text box will be sent
as a separate line to the Nonstop host. If more than one VTS server is deployed in
the environment, each VTS server must specify a unique name (for the NAME