Virtual TapeServer 6.04.03 Operations and Administration Guide

Using AutoCopy | 105
Here is an example configuration:
autocopy_enable='YES'
autocopy_pools='VTS001 VTS003 VTS004'
autocopy_target_ANYPOOL='VTS-DR'
Or:
autocopy_enable='YES'
autocopy_pools='DR1 DR2'
autocopy_target_DR1='SVR08'
autocopy_target_DR2='SVR08:/VAULT00/DR2_AU'
4. Click SAVE.
5. Restart the TapeServer process on the Supervisory Functions page.
autocopy_target_
ANYPOOL
Specifies the target of the copy operation
for all pools set by autocopy_pools.
Specify this parameter if you do not set the
autocopy_target_poolname parameter
for each pool in autocopy_pools. See
details about how to set this parameter in
the description of autocopy_target_
poolname.
VTS system
name
or, vault on a
VTS system,
such as /
VAULT00/
server1
or, pool on a
target system,
such as
server1:pool1
Parameter Description Values