Virtual TapeServer 6.04.03.01 for NonStop Servers Release Notes

Installation and Configuration | 4
Compatibility
This section describes interoperability of VTS with host servers, backup management
applications, and browsers. For a complete list of hardware and application compatibility, see
the HP Virtual TapeServer Compatibility Matrix.
Host server support
The following host servers are supported:
 NonStop S-series
 NS-series
 Blade systems
However, the following host servers were tested for use with VTS.
 HP Integrity NonStop NS1000 Server, H06.10.00 (Fibre Channel)
 HP NonStop S7000, SCSI only
Tape drive emulation
VTS emulates the following tape drive types:
 Fujitsu M2483B
 HP Ultrium 1-SCSI
 Sony DSX-500C
 Quantum DLT7000
 Quantum SDLT320
 Compaq Network Services Division 5257
Backup management application support
The following backup applications were tested and are supported for installation and use on
the VTS server:
 Symantec Veritas NetBackup 6.5
 IBM Tivoli Storage Manager 5.5
 EMC RSA Legato Networker 7.4
 CommVault Galaxy 7.0
For a list of backup management applications supported on the host server, see Host server
support on page 4.
Browser support
The following browsers are supported for use viewing the VTS web interface:
 Microsoft Internet Explorer 6.0 and above
 Mozilla Firefox 2 and 3