Virtual TapeServer 6.04.03.02 for NonStop Servers Release Notes

Known Issues | 15
 Using the Import/Export interface results in an error in encr_key.log. Invoking
an import or native export results in the “Error: missing device specification!” error in
encr_key.log. This appears when a pool, a single encrypted tape, or single non-encrypted
tape is selected. The message is benign and can safely be ignored. (TL-1035)
 Cached credentials used to log in after user logs out. When you log out, the log in
page is displayed. When you log in again, the web interface uses credentials in cache
instead of forcing you to enter proper credentials. (TL-4218)
 Incorrect link shown after Set Refresh Rate for System Status is performed.
When you select Set Refresh Rate for System Status from the Supervisor Functions page
and make a change, the System Status page is displayed but the link indicator arrows are
still pointing to the Supervisor Functions page. (TL-4311)
 Information not updated on the View Sg-Map Information page. The sg_map
information is not updated to reflect changes. (TL-4163, EAR 6219)
 Patches Installed table displayed after downgrading. After downgrading from
6.04.03 to 6.04.02, the System Status page still shows the upgrade path in the Patches
Installed section. This should not be displayed. (TL-4025)
 Cannot configure Ethernet port speed and duplex settings. The web interface does
not provide a way to configure Ethernet port settings, to possibly force speed and duplex.
(TL-4044)
 Web interface does not clearly indicate location of system restore image. The
web interface does not indicate that the restore image file is saved on the local file system.
It also does not warn the user that the Save File dialog might be blocked. (TL-4011)
WORKAROUND: Ensure browser pop-ups are enabled.
 Cartridge size check done on Cartridge Maintenance page instead of Pool
Maintenance page. Though you specify a maximum cartridge size on the Pool
Maintenance page, the system does not check for the size; it checks on the Cartridge
Maintenance page. (TL-3772)
 Cannot click button to confirm deletion of cartridges if deleting many. When
deleting many cartridges, the confirmation dialog box extends off the screen and does not
show the OK button. (TL-3562)
WORKAROUND: Press Enter when the dialog is displayed to confirm the deletion.
 Cannot edit VTD named “0”. If you create a VTD named “0”, you cannot edit the VTD,
though you can delete it. The following error message is displayed. (TL-3721)
The name 0 is already in use by virtual 0 51314695
 RMDR link is available after downgrade to 6.04.02 or 6.04.01. The RMDR link is
present on the System Status page after a downgrade, which is not supported in this
version of VTS. (TL-3878)
 VTD names and serial numbers should not be case-sensitive. When creating VTDs,
the web interface checks the case of the specified VTD name and serial number. However,
VTD names and serial numbers are not case-sensitive on the host server. For example,
you can create VTAPE01 and vtape01 on the VTS server, but the host server only sees
VTAPE01. (TL-3212)
WORKAROUND: Do not specify VTD names or serial numbers that have the same
combination of letters, no matter the case.