Virtual TapeServer 6.04.03.02 for NonStop Servers Release Notes

Known Issues | 27
 Labeling a virtual tape in an Autocopy pool logs error messages in ems.log.
Messages similar to the following are logged when a tape in an Autocopy pool is labeled.
Sat May 26 07:28:36 2007 DEV4: 07-05-26 13:20:09 \DEV4.
TANDEM.TAPE.G06 000659 : STATUS 1512 - TOOL14 TAPE DISMOUNTED FROM
DRIVE
Sat May 26 07:28:36 2007 DEV4: DISMOUNT Cartridge: TOOL14,
doAutoCopy: 2.
Sat May 26 07:28:36 2007 DEV4: ems_telnet.AUTOCOPY Error
autocopy_Host for TOOL14 is not configured.
The tape is mounted and dismounted during labeling, which causes AutoCopy to copy the
tape to the backup system. AutoCopy should copy a tape to the backup system only when
a tape is used, not labeled. (TL-405)
 Online help incorrectly describes the All Files option. In the online help provided
on the Instant DR page, the All Files option is described as follows:
“This option pertains to the use of wildcards in the source cartridge name. If All Files is
not checked, then only the most recently modified file in the set of cartridges identified
with the wildcard will be backed up. Checking All Files bypasses this selection process
and causes all of the wildcard identified files to be backed up.”
The description should read as follows:
“Select the All Files checkbox if you want to send all the files listed in the job to the
remote system. If you do not select this checkbox, only the newest virtual tape
(determined by the timestamp) is transmitted.” (TL-369)
GFS
 Pool Maintenance page loads slowly in a GFS environment. When you display the
Pool Maintenance page in a GFS environment, the page gathers all of the file system
statistics using the df command. On a busy GFS system or cluster that is fencing, df
hangs. (TL-434)
Utilities and services
 Cannot monitor disk arrays attached by Fibre Channel if HP SIM is installed.
External disk arrays cannot be monitored if the HP Systems Insight Manager (SIM) is
running on the VTS server. (TL-4368)
 vts-post-install.log cannot be viewed from Examine All Logs page. The vts-post-
install.log file is listed on the page but attempting to view it shows an empty log. (TL-
4392)
 Cannot open message log TAR file. If you attempt to open a message log TAR file, an
“Invalid Archive” error is displayed. (TL-4308)
WORKAROUND: Download and open the message log ZIP file.
 Cannot restart the httpd process because another process is using its port. After
stopping the httpd process, it cannot be restarted sometimes because another process is
listening on its port (80). (TL-4232)
WORKAROUND: Reboot or manually stop processes until port 80 is free.