Virtual TapeServer 6.04.04 for NonStop Servers Operations and Administration Guide

108 | Troubleshooting
A message similar to the following should be displayed:
httpd (pid 25380 25015 25014 25013 25012 25011) is running...
You can reboot VTS to attempt to solve the problem.
SCSI converter
During normal operation, the LEDs on the SCSI converter blink every 3-5 seconds. During
backups, the activity LED is almost solidly lit.
• Is the power turned on?
• Are all of the cables secured tightly?
• Are any pins bent on any of the cables?
• Are all four ports in use?
• Is normal communication occurring while SCF is running?
Be sure to stop the tape drive in SCF on the host server and power off the SCSI converter
before disconnecting cables.
External storage or the SAN
Verify the following:
• Is the storage array powered on?
• Are the lights on?
• Are all of the cables secured tightly?
• Are any cables broken?
• Is the link LED on? What is the color of the LED?
A green LED indicates normal operation; amber indicates failure.
If the HP StorageWorks Enterprise Virtual Array (EVA) is used for external storage, you may
see duplicate LUNs if you do not configure path failover. Refer to the Virtual TapeServer
Quick Start Guide for information about configuring path failover.
Event Management System (EMS)
Verify the following:
• Has the EMS logon expired?
• Is there network connectivity between VTS and the NonStop server?
• Was the VTS operating system or the EMS template upgraded?
• Is VTS up-to-date with the latest product enhancement code?
• Is there a typographical error in the VTS configuration file?
You can check the EMS log file for the last timestamp of messages.
If EMS auto-mounting is not functioning, perform the following:
• Check the TACL user ID for access privileges.
• Check the Ethernet cable.
• Check Ethernet connectivity and activity LEDs.