Virtual TapeServer 6.04.04 for NonStop Servers Operations and Administration Guide

116 | Troubleshooting
Other log files
The following log files are generated and saved in various directories on the VTS server.
Operating system logs:
• /var/log/messages
• /var/log/cron
• /var/log/boot.log
Apache web server logs:
• /var/log/httpd/error_log
• /var/log/httpd/access_log
VTS function logs:
• /usr/local/tape/log/ems.* (available from the VTS web interface)
• /usr/local/tape/log/debug.* (available from the VTS web interface)
• /usr/local/tape/log/mount.log
• /usr/local/tape/log/export.log (available from the VTS web interface)
• /usr/local/tape/log/event.log (available from the VTS web interface; see page 111 for
more information)
• /usr/local/tape/log/scanat.log
• /usr/local/tape/log/vtape.log
• /usr/local/tape/log/upgrade.log
• /usr/local/tape/log/ems.lastmount.cmd
• /usr/local/tape/log/rescan.txt
• /usr/local/tape/log/SecureVTS.log
Note Though you can change the log level of these files, the log level is reset to the default
every time VTS is rebooted.
6 Could not rewind tape after copy • Make sure tape drive is on and
properly configured
• Check cabling
7 Could not issue SCSI write
command, possible because of too
much data for physical tape
• Use larger tape or less data
• Verify configuration
• Check cabling
8 • SCSI write command failed
• Too much data for physical tape
• Use larger tape or less data
• Verify configuration
• Check cabling.
254 Incorrect file ownership Change ownership to bill.bill
Return
Code
Possible Cause(s) Corrective Action(s)