Virtual TapeServer 6.04.04 for NonStop Servers Quick Start Guide

Virtual TapeServer Quick Start Guide | 5
• Restraining any dangling items that can get caught in equipment.
• Working in an ESD-protected environment:
2Unpack and identify the hardware
Before mounting and cabling VTS, you must unpack the hardware and verify the box contents.
Unpack all hardware
A. Unpack all hardware and retain packing materials.
B. Inspect the hardware and the contents of the box(es). If damage is apparent, contact the
carrier and your vendor.
C. Place hardware on a flat, stable work surface. Always lift the enclosures by the sides.
Because the hardware is heavy, it is recommended that you use an assistant when lifting it.
Confirm that you received the following components, in addition to this guide and the hardware:
• VT5900-H
• Power cords
• HP ProLiant Essentials Foundation Pack CDs
• HP ProLiant DL385 G5 Documentation CD and posters
• HP Virtual TapeServer Base Release 6.04.04 DVD
•Rail kit
• VT5900-K
• Power cords
• HP ProLiant DL185 G5 Server Support and Documentation CD