Virtual TapeServer 6.04.04 for NonStop Servers Quick Start Guide

6 | Virtual TapeServer Quick Start Guide
• HP ProLiant DL185 Generation 5 Server Installation Sheet
• HP Virtual TapeServer Base Release 6.04.04 DVD
• External DVD/CD-ROM drive and USB cable
•Rail kit
• VT5900-L
• Power cords
• Power Cord Strain Relief Kit (clips and documentation)
• HP Insight Foundation Suite for ProLiant CDs
• HP ProLiant Firmware Maintenance CD
• HP Server Adapter Quick Installation Sheet
• HP ProLiant Server Setup Poster (includes DL380 G6 documentation CD)
• Rail kit (includes rail installation instructions)
• HP Virtual TapeServer Base Release 6.04.04 DVD
• SCSI converter (shipped with the VT5900-H and optional with the VT5900-L)
• Power cord
•Rail kit
•SCSI cables
• Virtual TapeServer SCSI Interface Connection Module Sliding Rail Kit Installation guide
• VT5930 (may have been shipped with the VT5900-H and VT5900-L)
• Power cords
• Serial cable
•Rail kit
• VT5931 (may have been shipped with the VT5900-H and VT5900-L)
• HP StorageWorks Modular Smart Array 30 Installation Kit CD
• Power cords
• SAS cables
•Rail kit
Review the VTS server configuration
Here is an overview of the VTS hardware that may have been purchased:
VT5900-H VT5900-K VT5900-L
Server DL385 G5 DL185 G5 DL380 G6
Fibre
Channel
and SCSI
Cards
• Two SCSI cards
(four ports),
or one SCSI card (two
ports) and one FC
card (two 2Gb ports)
*
• One FC card
(two 4Gb ports)
One FC card
(two 4Gb ports),
or two FC cards
(four 4Gb ports)
‡
• Three FC cards
(six 4Gb ports),
or up to five FC cards
(ten 4Gb ports)
‡
• Optional SCSI card
(two ports)