Virtual TapeServer 6.04.04 for NonStop Servers Release Notes

Known Issues | 32
menu_ScanCleanup=”YES” parameter, which displays the scan/cleanup option from
the window drop-down list on the Virtual Media page (TL-505).
WORKAROUND: Add this line to the VTS configuration file. To edit the VTS
configuration file, click Supervisor Functions on the navigation pane, and then click
Edit Configuration File under the Utilities section of the resulting page.
 Cartridge having less than minimum size is listed as erasable in Scan/Cleanup
after migration. If a cartridge is below the size specified by the cleanup_minimum_size_
MB parameter, the cartridge is scheduled to be erased by Scan/Cleanup after migration.
This is incorrect behavior; it should not be scheduled for erasure. (TL-444)
Migration
 Migration fails to erase cartridge after export if
hsm_erase_after_backup=”YES”. If the hsm_erase_after_backup parameter is set to
“YES” in vts.conf, the Migration operation will not erase the cartridge. (TL-4804)
 Default vts.conf file does not include migrate_all parameter. This parameter can
be set to allow all cartridges, including empty ones, to be migrated. This parameter is not
present in the default configuration file. (TL-3950)
 migrate_all parameter does not work for export. If the migrate_all parameter is set,
cartridges are migrated but not exported. (TL-3954)
 Cartridge not ejected after migration by Legato. After migration is completed, the
cartridge should be ejected and put back in the tape slot. If Legato is used to migrate the
tape, the tape is not ejected as expected. (TL-2390)
 Misconfigured migration settings cause “Error: Can't find any files with data to
backup” error. If you do not specify a BMA in vts.conf, or if you misconfigure a
migration setting, the “Error: Can't find any files with data to backup message is
displayed, which does not indicate the problem. (TL-2645)
 Error, miscellaneous messages logged after successful NetBackup migration.
Message similar to the following are logged in the debug log after a successful migration
with NetBackup 6.5:
Fri Nov 7 14:45:27 2008: [slave_signal_thread 15713] SIGCHLD received
while no active child, ignoring it.
Fri Nov 7 14:45:32 2008: [cli_tape 0x05000107] ERROR UNKNOWN tape
command 0x44 for Id 0
Fri Nov 07 14:46:15 2008: [lsof.pl] Error: lsof.pl /usr/sbin/lsof |
grep "/VAULT00/MAXPOOL/MAX001" 2>&1 failed!, rc=1, error=No system
error detected. Please check application logs for application errors.
(errno=-1).
These messages are benign and can be ignored. (TL-2347)
 The hsm_summary_limit configuration parameter is not used. This parameter
should not be used. (TL-2272)
 Unable to unmigrate a pool. You cannot unmigrate the cartridges in a pool by selecting
the pool; you must select individual cartridges. (TL-386)