Virtual TapeServer 6.04.04 for NonStop Servers Release Notes

Known Issues | 35
GFS
 Pool Maintenance page loads slowly in a GFS environment. When you display the
Pool Maintenance page in a GFS environment, the page gathers all of the file system
statistics using the df command. On a busy GFS system or cluster that is fencing, df
hangs. (TL-434)
Utilities and services
 Activity log is not displaying messages in date order. The latest job should be on the
top. (TL-4299)
WORKAROUND: Use the Clear Log button to correct the UI.
 Cannot monitor disk arrays attached by Fibre Channel if HP SIM is installed.
External disk arrays cannot be monitored if the HP Systems Insight Manager (SIM) is
running on the VTS server. (TL-4368)
 Cannot open message log TAR file. If you attempt to open a message log TAR file, an
“Invalid Archive” error is displayed. (TL-4308)
WORKAROUND: Download and open the message log ZIP file.
 Cannot restart the httpd process because another process is using its port. After
stopping the httpd process, it cannot be restarted sometimes because another process is
listening on its port (80). (TL-4232)
WORKAROUND: Reboot or manually stop processes until port 80 is free.
 hp-ilo module cannot rebuild itself after an upgrade then downgrade. When
performing an upgrade from 6.04.02, kernel headers are not backed up. Upgrading to
6.04.03 upgrades the kernel headers, which removes the old kernel headers. If you
downgrade to 6.04.02, there are no kernel headers for the 6.04.02 kernel. Therefore, there
is now way to install the hp-ilo module, which is part of the HP monitoring tools. The hp-
ilo module rebuilds itself when it is installed, and with the missing kernel headers after
the downgrade, the module cannot be built. (TL-4008)
 EMS service should be started before drives are initialized. EMS log reports that
the drive requested for the mount had an invalid BLTI because the drive had not been
started. This caused tapes to be mounted but no lock was in place, and the system
reported that a tape was locked when it was not. (TL-3456)
 Running getVTS_dbginfo from the command line displays errors. Errors similar
to the following are displayed if you run the utility as root. (TL-3877)
/etc/profile.d/idle-logout.sh: line 3: TMOUT: readonly variable
cp: cannot copy a directory, `/usr/local/tape/log', into itself,
`log/log'
cp: will not overwrite just-created `cfg/network' with `/etc/
sysconfig/networking/profiles/default/network'
cp: cannot stat `/usr/local/tape/patch': No such file or directory
ls: /vault: No such file or directory
WORKAROUND: Use the button on the web interface to obtain the logs.