Virtual TapeServer 6.04.05 for NonStop Servers Release Notes

Known Issues | 30
Native Export
 Physical tape could be corrupted if server is rebooted during a native export.
(TL-5456)
WORKAROUND: If the job log reports that an export failed, re-run the export job.
Migration
 Login path for CommVault 8 set to /opt/galaxy/Base/qlogin. The path should be set
to /opt/simpana/Base. (TL-5707)
WORKAROUND: Use the following commands as root:
mkdir /opt/galaxy
cd /opt/galaxy
ln -s /opt/galaxy/Base/qlogin /opt/simpana/Base
 Default vts.conf file does not include migrate_all parameter. This parameter can
be set to allow all cartridges, including empty ones, to be migrated. This parameter is not
present in the default configuration file. (TL-3950)
 Cartridge not ejected after migration by Legato. After migration is completed, the
cartridge should be ejected and put back in the tape slot. If Legato is used to migrate the
tape, the tape is not ejected as expected. (TL-2390)
 Misconfigured migration settings cause “Error: Can't find any files with data to
backup” error. If you do not specify a BMA in vts.conf, or if you misconfigure a
migration setting, the “Error: Can't find any files with data to backup message is
displayed, which does not indicate the problem. (TL-2645)
 Error, miscellaneous messages logged after successful NetBackup migration.
Message similar to the following are logged in the debug log after a successful migration
with NetBackup 6.5:
Fri Nov 7 14:45:27 2008: [slave_signal_thread 15713] SIGCHLD received
while no active child, ignoring it.
Fri Nov 7 14:45:32 2008: [cli_tape 0x05000107] ERROR UNKNOWN tape
command 0x44 for Id 0
Fri Nov 07 14:46:15 2008: [lsof.pl] Error: lsof.pl /usr/sbin/lsof |
grep "/VAULT00/MAXPOOL/MAX001" 2>&1 failed!, rc=1, error=No system
error detected. Please check application logs for application errors.
(errno=-1).
These messages are benign and can be ignored. (TL-2347)
 The hsm_summary_limit configuration parameter is not used. This parameter
should not be used. (TL-2272)
 Unable to unmigrate a pool. You cannot unmigrate the cartridges in a pool by selecting
the pool; you must select individual cartridges. (TL-386)
AutoCopy and Instant DR
 Unlabeled cartridges are not copied to target server. Cartridges that are unlabeled
and have been written to from the host server are not copied to the target server during
AutoCopy. (TL-4286)