Virtual TapeServer 8.0 Configuration Guide

4 | Introduction
Accessing the VTS web interface
VTS is managed through a standard web browser interface. To access the web interface,
launch a supported web browser that is on the same internal network as VTS and then enter
the following URL:
https://ip_address
where ip_address is the management network interface address.
Or, if the Domain Name System (DNS) is configured on the network, enter the following:
https://hostname
where hostname is the hostname of the VTS server.
If VTS is configured to use a self-signed certificate to secure communication between your
browser and the VTS web application server, the certificate may cause the browser to display
a warning page and certificate errors. You can accept the certificate or add an exception
(depending on your browser) and continue to the web interface.
Links on the navigation pane on the left side of the page enable you to navigate through VTS
functions.