Virtual TapeServer 8.0 Configuration Guide

Troubleshooting | 147
Export log
This log provides information about all export operations. If a problem occurs, a return code is
listed in the log file, such as in this example:
000000016: Fri Jun 11 10:45:02 2010: NSPOOL:V16009 Rewind failed! /dev/nst2, rc=1
Here is an explanation of the return codes that may be displayed in this log:
4 81 002 Erase by List erase-by-list-crumb
XML Mount
8 90 003 XML Mount xml_socket id=50 MSG
2 90 004 XML Mount xml_socket id=50 safely
mounted VOL
2 90 005 XML Mount xml_socket id=50 no space check
mount VOL
System Status
8 91 003 Space check chk_space MSG
8 91 004 Space check system_status WARN
8 91 004 System Status Warning: low space
opwin_filesystem_alert <vault>
8 91 004 System Status Warning: low space
lowspace_notify_percentage
<vault>
8 91 004 System Status Warning: low space
cleanup_threshold_percentage
<vault>
Return
Code
Possible Cause(s) Corrective Action(s)
-1 • File is empty on export
• Rewind failed
• Parameters incorrect or missing
(internal error)
• Retry with a non-empty file
• Load tape in drive
• Make sure tape drive is on and
properly configured
• Check cabling
1 Could not allocate buffer (malloc) N/A
2 Could not lock memory (mlock) N/A
Severity ID
Subsystem
ID
Event
ID
Subsystem Message Text