Virtual TapeServer 8.0 Configuration Guide

158 |
e. On all subsequent VTS servers, log in, become root, and enter these commands:
service clvmd start
service cman start
service ricci start
service gfs start
f. On the first VTS server, enter these commands:
service gfs start
clustat
Verify that media is now available on the VTS servers by clicking Configuration→Tapes
and Pools on the navigation pane.
You can now start the tape devices on the host server and begin backups.
Shutting down GFS
If you need to remove one server from the cluster, use the following procedure.
Shutting down GFS on one server
1. Log in to the server.
2. Become root:
su -
3. Unmount GFS file systems:
umount -a -t gfs
4. Stop the ricci configuration service:
service ricci stop
5. Stop the GFS service:
service gfs stop
6. Stop the clustered LVM service:
service clvmd stop
7. Stop the cluster manager service:
service cman stop
8. Reboot VTS. If no errors are displayed, it is safe to reboot VTS now that the node has been
removed from the GFS cluster. After reboot, you may need to manually rejoin the cluster.