Virtual TapeServer 8.0 Configuration Guide

Creating and Managing Virtual Media | 77
3. Click Import/Export. Or, if Data Encryption is enabled and the tape is encrypted, click
Import/Decrypt&Export. The Virtual Media - Import/Export page is displayed.
If one or more physical tape drives are connected to VTS, they are detected automatically.
(If a physical tape drive is not listed, such as if it was connected after VTS was booted, you
may need to rescan the SCSI controllers. See
Common issues on page 127 for more
information.)
Note If the Import/Export button is not displayed, see Enabling features on the web
interface on page 115 for information about displaying this button.
4. Click EXPORT.
5. Select a tape drive from the Tape Devices drop-down list.
6. Click DISPATCH to export the virtual tape or pool to the selected drive.
Note If the VTS server is rebooted while an export is in progress, the job will fail and the
virtual tape will remain locked.
Status is displayed in the Activity Log text box. Click REFRESH to update the status
messages. Note the following exit return codes used in the Activity log for export operations:
0 Success
1 Could not malloc buffer
2 Could not mlock memory
3 Could not open data source file
4 Could not open physical tape drive
5 Could not load and rewind tape before copy
6 Could not rewind tape after copy